Alinking ALC-9451 Manual de usuario descargar pdf (Pagina 13)

1. Take the network module base put from

the camera unit pack.

2. Use the screws in Screw Pack A to secure

the module base on the wooden plate.

Note: Do

not affix the camera on a ceiling made from fragile material, such as gypsum,

calcium carbonate, magnesia, PU, PVC, and glass. The thickness

of the wooden

plate should be at least 1.

5 cm. If the camera is to be fixed on a concrete or

brick surface, suitable setscrews should be prepared by the user. For

convenience of the installation, the wooden plate can be removed from the

ceiling in advance and assembled back after the network module is fixed.

3. Pull out the steel wire from the network

module base.

4. Connect the steel wire to the hook on the PTZ

Dome Camera to prevent accidental falling of

the camera.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 92 93

Sin comentarios

Alinking ALC-9451 Manual de usuario Pagina 13