Alinking UNC-9512 Manual de usuario descargar pdf (Pagina 72)

Application Setting > Event > Trigger (manual test of trigger

response)

Whenever the camera detects abnormal events during the scheduled time, it will

automatically respond by performing trigger response. There are 3 types of trigger

responses: alarm sending, LED status indicator flash, and emailing the alarm or

recorded image to the specified server. To use this function, enter the server

information by accessing Application Setting > Event > Event Server. You may

perform manual test as specified in this section once you complete the setting to

ensure that all functions are working properly.

Trigger setting

The default status of the digital input pin is set as “Normal Open”, but users can

change it to “Normal grounded” by setting the page

“Setting->Application->Event->Trigger”:

1. When alarm input is set to be “Normal Open”, then the external device connected

to alarm input pin should be in open status. So when the external device is

triggered to close status, the alarm input pin will be triggered.

2. On the contrary, when alarm input pin is set to be “Normal Grounded”(see the

figure below), then the external device connected to alarm input pin should be in

close status. So when the external device is triggered to open status, the alarm

input pin will be triggered.

Trigger Alarm output: Alarm output

Click “Set” to trigger the alarm. Click “Clear” to stop the alarm.

Trigger LED: LED indicator display

LED: Event status: click “Set” to turn on the LED event status indicator.

Click ”Clear” to turnoff the indicator.

LED: Link status : click “Set” to turn on the LED Link status indicator. Click “Clear”

to turnoff the indicator.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 88 89

Sin comentarios

Alinking UNC-9512 Manual de usuario Pagina 72